Eleaf iStick 30W Review and How To Use
It has been 5 years since the release of Eleaf iStick 30W, but her still has a group of very loyal fans, and so far, Eleaf has released more improved product versions: such as Eleaf iStick Pico, Eleaf iStick Nowos, Eleaf iStick Mix, Eleaf iStick Amnis, Eleaf iStick Rim and other products. These are all commonly used devices for vapers, and are very popular with vapers, and are more powerful in function and output.
Other iStick Products Link:
Eleaf iStick Nowos 80W Mod Kit
Although many versions have been updated, Eleaf iStick 30W still has her differences. Let's understand it together.
Eleaf iStick 30W Review
Eleaf iStick 30W is an upgraded version compared with the original iStick. It is more powerful: with 2200mAh battery capacity, it can handle up to 8V, 30W and support sub ohm coil. It is more practical: wear-resistant stainless steel thread, elastic connector and streamlined design on top make iStick 30W more suitable for atomizers. More ever, the added button lock functionality protects the button from unintentional presses.
How to Use & Unlock Eleaf iStick 30W
Press the square button for five times to turn on the battery, and then long press the square button to get a puff. Loosen the square button to stop puff.
Eleaf iStick How To Switch Modes:
Switch the VV/VW mode:
Press the square button for three times to switch the VV/VW mode when the battery is turned on. In VV mode, you can adjust output voltage between 2.0V-8.0V. In VW mode, you can adjust output wattage between 5W-30W.
Adjust the voltage/wattage:
Press the up-and-down arrow buttons to increase or decrease the voltage/wattage. Keep pressing the up/down arrow button, voltage/wattage will increase or decrease slowly at first, then they will increase/decrease at a constant high speed. The number will stop increasing/decreasing when you loosen the up/down arrow button.
Button lock functionality:
Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is on, then they will be locked and the screen will reflect “Lock”. Still keep pressing simultaneously for 2 seconds to unlock them and the screen will reflect “Unlock”.Through these operations, you can protect the buttons from unintentional presses and prolong their service life.
Switch the display mode:
Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is off, the screen display will rotate 180 degrees. You can view the screen from two kinds of angle through this operation.
Battery & LED Indicator
The battery level indicator on the OLED screen will keep flashing during charging. When 2.5 hours, the iStick 30W will fully charged, the indicator will stop flashing and keep shining for 15 seconds then go out.
Hinterlassen Sie einen Kommentar